design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors r.cap. code r. voltage code lot. no. polarity marking(+) l w s w1 h s surface mount type series : tpf super low esr (5 m max.) large capacitance (1000 f max.) rohs compliance, halogen free size code d2e d3l d4 category temperature range C55 c to +105 c rated voltage range 2.0 v.dc 2.5 v.dc to 10 v.dc 2.5 v.dc to 6.3 v.dc category voltage range 2.0 v.dc 2.5 v.dc to 10 v.dc 2.5 v.dc to 6.3 v.dc rated capacitance range 220 f to 330 f 150 f to 680 f 470 f to 1000 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan d ) please see the attached characteristics list surge voltage (v.dc) rated voltage 1.15 endurance +105 c, 2000 h rated voltage applied capacitance change within 20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 500 h, no-applied voltage capacitance change within +50 %, ?20 % of the initial value(2tpf220m6, 2TPF330M6, etpf1000m6h (5h)) within +40 %, ?20 % of the initial value (except for above model) tan d < 1.5 times of the initial limit dc leakage current < 3 times of the initial limit size code l0.3 w0.2 h0.2 ? 1 s0.2 w10.1 d2e 7.3 4.3 1.8 1.3 2.4 d3l 7.3 4.3 2.8 1.3 2.4 d4 7.3 4.3 3.8 1.3 2.4 r. voltage (v.dc) 2.0 2.5 4.0 6.3 10.0 code deg j a unit : mm ? externals of ? gure are the reference. ? 1 0.1 :d2e features speci cations marking dimensions (not to scale) jun. 2018 02 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors characteristics list series rated voltage (v.dc) rated temp. (c) category voltage (v.dc) category temp. (c) rated capacitance (f) case size (mm) size code specifications standard floor life lwh ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan d ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) re? ow temp < 260c re? ow temp < 250c tpf 2 105 2.0 105 220 7.3 4.3 1.8 d2e 4700 6 0.10 88.0 2tpf220m6 3000 C 2a 105 2.0 105 330 7.3 4.3 1.8 4700 6 0.10 132.0 2TPF330M6 3000 2.5 105 2.5 105 330 7.3 4.3 2.8 d3l 4400 7 0.10 82.5 2r5tpf330m7l 2500 3 105 2.5 105 470 7.3 4.3 2.8 4400 6 0.10 117.5 2r5tpf470m6l 2500 105 2.5 105 7.3 4.3 2.8 4400 7 0.10 117.5 2r5tpf470m7l 2500 105 2.5 105 7.3 4.3 2.8 4400 10 0.10 117.5 2r5tpf470ml 2500 105 2.5 105 7.3 4.3 3.8 d4 6100 5 0.10 117.5 etpf470m5h 2000 105 2.5 105 680 7.3 4.3 2.8 d3l 4400 6 0.10 170.0 2r5tpf680m6l 2500 105 2.5 105 7.3 4.3 2.8 4400 7 0.10 170.0 2r5tpf680m7l 2500 105 2.5 105 7.3 4.3 2.8 4400 10 0.10 170.0 2r5tpf680ml 2500 105 2.5 105 7.3 4.3 3.8 d4 6100 5 0.10 170.0 etpf680m5h 2000 105 2.5 105 1000 7.3 4.3 3.8 6100 5 0.10 250.0 etpf1000m5h 2000 105 2.5 105 7.3 4.3 3.8 5600 6 0.10 250.0 etpf1000m6h 2000 4 105 4.0 105 330 7.3 4.3 2.8 d3l 4000 12 0.10 132.0 4tpf330ml 2500 105 4.0 105 470 7.3 4.3 2.8 4400 10 0.10 188.0 4tpf470ml 2500 105 4.0 105 680 7.3 4.3 3.8 d4 4400 10 0.10 272.0 4tpf680mah 2000 6.3 105 6.3 105 220 7.3 4.3 2.8 d3l 6100 5 0.10 138.6 6tpf220m5l 2500 105 6.3 105 7.3 4.3 2.8 4600 9 0.10 138.6 6tpf220m9l 2500 105 6.3 105 7.3 4.3 2.8 4000 12 0.10 138.6 6tpf220ml 2500 105 6.3 105 330 7.3 4.3 2.8 3900 9 0.10 207.9 6tpf330m9l 2500 105 6.3 105 470 7.3 4.3 3.8 d4 4400 10 0.10 296.1 6tpf470mah 2000 10 105 10.0 105 150 7.3 4.3 2.8 d3l 3600 15 0.10 150.0 10tpf150ml 2500 C ? 1 ripple current (100 khz/ +45 c ), ? 2 esr (100 khz/+20 c) ? 3 tan d (120 hz/+20 c) ? 4 after 5 minutes please refer to each page in this catarog for reflow conditions and taping specifications. jun. 2018 02 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
